Dryers

Ring Dryer

The MKS Ring Dryers are excellent in performance and used throughout the process industries and are highly reliable.

The Ring Dryer is a special development of the Flash Dryer Incorporating an internal airborne recycle For greatly improved operation and efficiency. Our designed of Ring Drying System consists of a “manifold” or “internal classification which differentiate it from flash dryer The Internal ‘circulation in the Ring Dryer, which is of the manifold, a special centrifugal classifier designed to separate dry and fine particles.

While holding large moist particles in prolonged circulation this enables the Ring Dryer to process many materials that were earlier considered difficult to dried with the help of a Flash Dryer efficiently and also to obtain exceptionally good control of the final product moisture content.

Spray Dryer

We are leading Manufacturer of customized Spray Dryer as per Client and process requirement.

Spray drying is considered a powerful technological process since it brings feasibility to the production of free-flowing particles with well-defined particle size. The scalability and the cost-effectiveness of this manufacturing process in obtaining dried particles in submicron-to-micron scale favors an increasing variety of applications within the food, chemical, polymeric, pharmaceutical, biotechnology and medical industries.

Spray drying is a method of producing dry powder from a liquid or slurry by rapidly drying with hot gas using a pressure atomizer which converts the pressure energy is converted into kinetic energy and dispersed as droplets at a high-speed discharge.

Flash Dryer

MKS Flash Dryer is a pneumatic system which is efficient and inexpensive drying technology.

Our flash dryer system is an inexpensive solution to drying powders and granular materials, and is designed for high moisture materials with a constant-rate drying zone and can use higher gas temperatures, versus other dryer types, because the material retention time is very short. Drying takes place in a matter of seconds.

The pneumatic or ‘flash’ dryer’ is a method suited for products that dry rapidly owing to the easy removal of free moisture or where any required diffusion to the surface occurs readily. These types of dryer are mainly used for drying of heat sensitive or easily oxidizable materials. The wet materials that are to be dried are passed into a high-temperature air stream (or other gas) that carries it to a hammer mill or high-speed agitator, which conveys it through a drying duct where high heat and mass transfer rates rapidly dry the product. Applications include the drying of filter cakes, crystals, granules, pastes, sludge’s and slurries, in fact almost any material where a powdered product is required. The drying rate is very high for these dryers, but the temperature does not rise much because of the short residence time.

Fluidized Bed Dryer

MKS is a Specialized Manufacturer of Fluidized bed dryers as per Client and process requirement.

We design Fluidized Bed dryers for food and dairy, chemical and pharmaceutical industries. Fluidized bed drying is the optimal method for controlled, gentle and even drying of wet solids. The intensive heat/mass exchange of the fluidized bed product makes this method particularly effective and time-saving. The technology is also suitable for post-drying of spray granulated or extruded products with very low residual moisture.

This technology is applied for drying and/or cooling for production of agglomerates and granulates from fine powders.

Our Fluid Bed dryers are all designed for our clients’ specific purposes, matching the industry specific standards and requirements.

ROTARY (BUNDLE) Dryer

MKS is one of the best Rotary/Bundle dryer specialists in INDIA.

Rotary dryer is a kind of drying equipment for processing, vast range of, large quantities of materials. It has characteristics of reliable operation, large operation flexibility, strong adaptability, large processing capacity, strong adaptability of materials, drying of various materials.

Working Principle:

The rotary dryer is mainly composed of a rotating body, a lifting plate, a transmission device, a supporting device and a sealing ring. The dryer is a cylinder that is slightly inclined from the horizontal direction. The material is added from the higher end. The high-temperature heat source and the material flow parallelly or counter-flow into the cylinder.

As the cylinder rotates, the material flows to the lower end. The lifting board on the inner wall of the cylinder lifts up and drops down the material, so that the contact surface of the material and the air flow is increased to increase the drying rate and promote the advancement of the material. The dried product exits the dryer from the lower end.